Hardware Parameter |
Working voltage |
12V ~ 16V |
Input voltage |
3S ~ 4S |
Output voltage |
5V (connect with PWM) |
Dynamic current |
500mA @ 12V |
Idle current |
400mA @ 12V |
Power consumption |
≤ 6W |
Working environment temp. |
-20? ~ +60? |
Output |
micro HDMI(HD output 1080P 60fps) / IP / SDI |
Local-storage |
SD card (Up to 128G, class 10, FAT32 or ex FAT format) |
Control method |
PWM / TTL / S.BUS (subject to actual product) |
Gimbal spec |
Pitch/Tilt |
±90° |
Roll |
No support |
Yaw/Pan |
±170° / ±360°*N (IP / SDI output) |
Vibration angle |
Pitch/Roll: ±0.01°, Yaw?±0.01° |
One-key to center |
√ |
Camera spec |
Imager Sensor |
SONY 1/2.8" "Exmor R" CMOS |
Picture quality |
Full HD 1080 (1920*1080) |
Effective pixel |
2.13MP |
Lens optical zoom |
30x, F=4.3~129mm |
Digital zoom |
12x (360x with optical zoom) |
Min object distance |
10mm(wide end) to 1200mm(tele end). Default 300mm |
Horizontal viewing angle |
1080p mode: 63.7°(wide end) ~ 2.3°(tele end) |
720p mode: 63.7°(wide end) ~ 2.3°(tele end) |
SD: 47.8°(wide end) ~ 1.7°(tele end) |
Sync system |
Internal |
S/N ratio |
more than 50dB |
Min illumination |
Color 0.01lux@F1.6 |
Exposure control |
Auto, Manual, Priority mode(shutter priority & iris priority), Bright, EV compensation, Slow AE |
Gain |
Auto/Manual 0dB to 50.0dB(0 to 28 steps + 2 setep/ total 15 steps) Max.Gain Limit 10.7 dB to 50.0dB (6 to 28 steps + 2 step/ total 12 steps) |
White balance |
Auto, ATW, Indoor, Outdoor, Outdoor Auto, Sodium Vapor Lamp (Fix/Auto/Outdoor Auto), One-push, Manual |
Shutter speed |
1/1s to 1/10,000s, 22 steps |
Backlight compensation |
Yes |
Aperture control |
16 steps |
Defog |
Yes |
OSD |
Yes |
Fotoformate |
JPEG |
Videoformate |
MP4 |
Camera Object tracking |
Update rate of deviation pixel |
50Hz |
Output delay of deviation pixel |
<15ms |
Minimum object contrast |
5% |
SNR |
4 |
Minimum object size |
16*16 pixel |
Maximum object size |
160*160 pixel |
Tracking speed |
±32 pixel/frame |
Object memory time |
100 frames (4s) |
The mean square root values of pulse noise in the object position |
< 0.5 pixel |
Thermal imager spec |
Lens size |
25mm |
Horizontal FOV |
24.6° |
Vertical FOV |
18.5° |
Diagonal FOV |
30.4° |
Detective Distance (Man: 1.8x0.5m) |
735 meters |
Recognize Distance (Man: 1.8x0.5m) |
184 meters |
Verified Distance (Man: 1.8x0.5m) |
92 meters |
Detective Distance (Car: 4.2x1.8m) |
2255 meters |
Recognize Distance (Car: 4.2x1.8m) |
564 meters |
Verified Distance (Car: 4.2x1.8m) |
282 meters |
Working mode |
Uncooled long wave (8μm~14μm) thermal imager |
Detector pixel |
640*480 |
Pixel size |
17μm |
Focusing method |
Athermal prime lens |
Emissivity correction |
0.01~1 |
NETD |
≤50mK (@25?) |
MRTD |
≤650mK (@characteristic frequency) |
Image enhancement |
Auto adjust image brightness and contrast ratio |
Color palette |
White, iron red, pseudo color |
Auto Non-uniform correction |
Yes (no shutter) |
Digital zoom |
1x, 3x |
Sync correct time |
Yes |
Thermometry type |
Temperature bar (psudo color display) max temp, min temp, FOV center temp (Optional) |
Temperature warning |
0?~100? |
Thermal Object Tracking |
Update rate of deviation pixel |
25Hz |
Output delay of deviation pixel |
<3ms |
Minimum object size |
16*16 pixel |
Maximum object size |
128*128 pixel |
Tracking speed |
±32 pixel/frame |
Object memory time |
100 frames (4s) |
Packing Information |
N.W. |
1151g |
Product meas. |
127*122*177.1mm |
Accessories |
1pc gimbal camra device, 16pcs screws, 4pcs copper cylinders, 12pcs damping balls, 4pcs damping boards / Hight quality plastic box with foam cushion |