AUSTARS PB6 Charging Board with EC3/XH Connectors (Global Warehouse)

Parallel balance/charging board for 2-6s lithium polymer batteries with XT60 Connectors and JST-XH type balance connectors. You can use the parallel balance board to vastly reduce your charging time. For example if you have 3 of 2,200mAh 3s Li-Po batteries which you usually charge at 1C (2.2A), this would usually take approximately 3 hours to charge each pack individually. With this balance board you can charge all three packs in about one hour.

This parallel balance board can be used to parallel charge and balance up to 6 lithium polymer batteries of the same cell count. We recommend that all cells should be within 0.1V of each other.
The balance connector from the board is a 6s JST-XH type. The charging lead from the board is standard 4mm charge leads, which should fit most chargers.
Maximum throughput, 40A. This board is fused.
Do not mix cell counts (i.e. do not try to parallel charge a 3s and 4s pack)
Do ensure that all cells are within 0.1V of each other before connecting
Do connect the main charge leads of the packs to the board before connecting the balance leads.

Features:

ABS Fireproof Material 2 oz PCB + Heavily Tinned 40A Fuse can be replaced Double insurance ( 4 Packs ParaBoard ) Super quality rc connectors High-end atmospheric grade Perfect design Quick-acting Charging
Specification: 6 Packs paraBoard ( Fuse 40A ) 4 Packs paraBoard ( Fuse 40A + 1.85A / 1.1A ) Housing material : ABS Fireproof Material Color : Black & Blue