SPECIFICATIONS:
Wingspan:1500mm (59.1in)
Length:1663mm (65.5in)
Flying Weight:5kg (11 lb) with 12S Battery
S-EDF/Motor:S-EDF 105mm 4258/700KV brushless
Number of EDF Blade:11 blades
Cruising speed:about 180 km/h
Flying time:4.5 min (avg)
Wing area:34.28 dm2
Wing load:145.9 g/dm2
Main material:35 times EPO
Painting surface:matte paint
Suitable experience level:Zero basis Beginner Intermediate Advanced
PNP Assembly difficulty:10mins 30mins 60mins
Suitable for ambient temperature:0 Celsius ~ 40 Celsius
Radio System:7 channel (required & not included)
ESC:160A/12S Hobbywing AS150
UBEC:6A (2P Du-Pont and JR connector)
Control System:Integrated Mix-Control system
Servos:
25g x3 Metal gear with 190mm lead (Left & right ailerons & rudder forward)
25g x2 Metal gear with 480mm lead (Flap forward)
25g x2 Metal gear with 80mm lead (Elevator forward)
12g x1 Metal gear with 450mm lead (Nose wheel steering forward)
12g x1 Metal gear with 300mm lead (360°lock Hatch cover forward)
Recommended Receiver Battery:2S,7.4V,1800?2000mAh,LiPo with T type plug(required & not included)
Recommended Power Battery:6S,22.2V,5000?6000mAh x2,LiPo with AS150 type plug(required & not included)
Ailerons:Yes
Flaps:Yes
Elevator(Horizontal tail):Yes
Rudder(Vertical tail):Yes
General landing gear control system:Yes
LED lights system:Yes
Electromagnetic brake system:Yes
Reinforced gyro:not included
Packaging / Size:Packing Box + Outer Box(Card mark)/132.5X46X39.5(cm)
CG (Center of Gravity):6.69in from the leading edge of the Main Wing
Landing Gears:Metal electric retractable hydraulic landing gear x3
Battery Charger:LiPo battery charger (required & not included)
PACKAGE INCLUDES:
Fuselage x1
Left Wing x1
Right Wing x1
Left Horizontal Stabilizer x1
Right Horizontal Stabilizer x1
Vertical Stabilizer x1
Nose x1
Cockpit canopy x1
Main wing aluminum tube L=598mm external diameter 16mm x1
Horizontal Stabilizer tube L=500mm external diameter 6mm x1
Sticker x1
Accessories Bag 1 x1
Screw (PWM4×35mm) x4 (Nose)
Screw (PM3×14mm) x2 (Wing)
Screw (PM3×10mm) x2 (Wing)
Screw (PA2×12mm) x4
Screw (PA3×8mm) x8 (Horizontal Stabilizer/Vertical Stabilizer)
Manual x1
REQUIRES:
*7 channel radio system(radio & receiver) (required & not included)
*6S,22.2V,5000?6000 mAh LiPo with AS150 type connector x2(required & not included)
*2S,7.4V,1800?2000 mAh LiPo with T type connector x1(required & not included)
*LiPo battery charger (required & not included)
