JET RULER 1/8.5 F16
JET Ruler is very pleased to announce the production of what is one of aviations most epic aircraft ever, the General Dynamics F16 Fighting Falcon.
This 1/8.5 scale version has been designed with an improved wing area, to provide better performance and flight characteristics.
SPECIFICATIONS:
Model: 1/8 .5 F16
Wingspan: 52.9″ (1,344mm)
Length: 71.3″ (1.81mm) – Plus pitot tube
Weight: 17.8lbs (7.85kg)
BASIC SETUP:
Control throws:
Aileron: 10mm up / 10mm down – 40% Expo
Measured from the wingtip
Rudder: 35mm left / 35mm right – 50% Expo
Elevator: 40mm up / 40mm down – 45% Expo
Measured from the front of the leading edge of the elevator.
The CG is 148mm from the front leading edge on the root of the wing (Factory Settings)
FEATURES:
Full composite construction, lightweight and strong
Painted outside the mold so no seam lines
Easily detachable ventral fins, helps in place with just two screws
INCLUDED HARDWARE:
Complete air frame (including fibreglass control horns)
Carbon fibre wing-tubes
Servo extension leads
Fixed Dual wall thrust pipe (for 60-100N turbines)
Fuel tank (2000ml)
Pre-prepared pushrods with ball links
Pre-glued control horns
OPTIONAL EXTRAS:
- Simulate fighter cockpit
- Light system
- PNP and installation service
- REQUIRED HARDWARE:
- Turbine: 60-100N
- Servos: x9
- x5 middle size servo, 35 x 15 x 30mm (minimum 16kg) // Uses x1 per aileron, x1 per elevator, x1 on rudder
- x4 middle size servo, 35 x 15 x 30mm (minimum 10kg) // Uses x3 for gear doors and x1 for steering
- Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.
There are 3 x versions optional
ARF version (Accs. are not installed)2L fuel tank, fuel tank filler, fuel tank exhaust port, servo extension leads, hardware, tail nozzle, Electric retracts with controller, Brake controller, pre-installed lights with controller, wingtip missile
ARF Pre-Mounted Version (Accs. pre-installed) 2L fuel tank, fuel tank filler, fuel tank exhaust port, servo extension leads, hardware, tail nozzle, Electric retracts with mounted gear doors and controller, Brake controller, pre-installed lights with controller, wingtip missile
PNP version (Accs., Servos and Linkages pre-installed) 2L fuel tank,UAT, fuel tank exhaust port, servo extension leads, hardware, tail nozzle, Electric retracts with controller, Brake controller, pre-installed lights with controller?wingtip missile, Scale Cockpit & Jet Pilot, maintenance stand.
COLOUR SCHEMES AVAILABLE:
Colour scheme 01 :
Colour scheme 02 :
Colour scheme 03 :
Colour scheme 04 :
Colour scheme 05 :
Colour scheme 06 :
