If you are considering a purchase
Chat with Online Sales for more information before you purchase! |
|
If you already made a purchase
Contact Customer Service for order status and other after-sales issues. Submit a Request |
Get 50 AM points coupon when you sign up for our newsletter
Jingping Hobby 70mm EDF Specification:
Jingpin Hobby uses High grade aluminium alloy material for highest rigid structure and lightest weight.
- aluminium shroud body act heat sink and cooler structure assures your motor will run cooler.
- The highly rigid structure design is capable of running up to 88,000 RPM to produce extremely high
efflux velocity for maximum speed and efficiency
- Anti Blade flying out design,the Blades be safety kept in the shroud and without damage.It is the
best replacement for your plastic or carbon shroud if you want to have a safety EDF fan.
- Each metal blade is precisely made of High Grade Aluminum alloy to generate jet airflow. Every
blade has been tested for 8 hours of metal fatigue test as well as in the dynamic balance machine
for calibration, making it bring a better and safer user experience for every RC fan.
- You could assemble our EDF system with any other motor without losing dynamic balance effect.
Specifications |
||
KV |
2200kv |
|
Maximum current |
80A |
|
Motor |
JP 3046-2200kv (4mm Axle) |
|
Blade (4S) |
71mm EDF unit with a 12 blade metal fan |
|
Fan diameter |
81mm |
|
Exit air diameter |
64.37mm |
|
Maximum thrust |
2.6kg |
|
Maximum efficiency |
90% |
|
Maximum RPM |
75,600 |
Twin 70mm EDF running detail at 6S
22.2V / 62.3A / 2.115kg(thrust testing stand) / 1376W
25.2V / 76.4A / 2.605kg(thrust testing stand) / 1925W
Material : Special Aluminum
Totally Weight: 225g (Include Motor)
Connect Banana: 4mm
Continual Power: 2.2kg
Suggested Components:
ESC: 100A
Timing : 15°
Battery : 6S 5000Amh 40C LiPo
NOTE :Manufacturers have Improved and adjusted the motor
For The new Version , Motor protection cover be cancel for better heat dissipation.
The picture of new version:
WARNING: Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.