MCT-3500W Power Supply System for all branded Drones on the market.
Team Austars provide 24/7 technical support w/WhatsApp+610433000015
Features
With Ethernet-Optical Cable (optional for 3500W version)
- Optional Wi-Fi control function by Mobile phone
- Adjustable Output Voltage
- Full CNC aluminum Hard Case
- LED Display with data info
- Anti-Shock Design
- Compatible with near all branded drones on the market
Technical specifications
Cable length 110m
Output voltage 24-50V/6S-12S
Power (output) 3500W
Cable weight: 2kg/110m
Input voltage 220Vac 50Hz
Cable tensile strength 50kg
Automated Tether Winding
Contain optical fiber cable for data transfer
Ground Station Weight: 30kg (MCT-3500W-G)
Ground Station Weight: 35kg (MCT-3500W)
System base station size 50cm x40cm x35cm (length, width, height)-MCT-3500W-G
System base station size 66cm x63cm x40cm (length, width, height)-MCT-3500W
Air Power Supply (Air Module) Included
Weight: 700g (22x9.5x 4.4cm)
Input Voltage: 380-410V DC
Output Voltage: 47.5-50.4V DC
Output Current: 70A
Output Power: 3500W w/overvoltage/current protection)
Max Altitude: 5000m w/Temp range -40-125c dgree)
Parallel Configuration to reach 7000W (ok)
- LED display screen: Mainly display company information, product model, current, voltage, power, temperature, winch tension, cable length and alarm code, etc.; (3500W has no warning/alarm function)
- Winch control knob: 0~9 gears, 6.5 gears is the maximum in normal operation, drone is hovering with knob gear level 4, over that level, the winch system will pull back the drone;
- Cable power knob: The main function is to press and hold the cable for 3s to power on, and then press the cable for 3s to power off; lightly press for 1s to enter the submenu to set the input voltage and alarm power;
- System switch: the ON state turns on the power supply of the entire equipment, and the OFF turns off the entire system equipment; press and hold the middle button for 3S to reset the system;
- Cable outlet: there is a reciprocating lead screw in the brush, and the cable joint is placed in the brush to reduce the dust and debris from entering; Cable Opening on for temperature over 30 degree applicable
- Alarm light: when there is an error in the system or a precautionary warning is set, it will flash and beep, and you need to tap the cable power to unlock
- FC interface: It can be connected to the ground control station and the required display equipment;
- 220v AC Input Port: operate with the power input cable provided by Austars Team, plug it in to power on;
- Cable assembly: input the ground power supply 400~500v DC high voltage power into the airborne power supply, which can pass through 5~10A current;
- On-board power supply: convert the high voltage input from the cable into 48v DC for use by the motor.
- Hardware and function part
- Separation of strong and weak electricity. At present, the ground high voltage (400~500V) of the product is isolated by a switch, which can protect the operator from the danger of high voltage electric shock when retracting and unwinding the cable (many manufacturers output high voltage 400V~800V when the cable is turned on. )
- The cable can realize automated tether winding and unwinding, and the pulling force and speed of the winding and unwinding can be adjusted to match the aircraft with different take-off weights, and the winding and unwinding accuracy can reach 0.01m.
- The adjustable range of the initial voltage of the ground power supply is 380-400V, and the adjustable range of the high-voltage compensation voltage is 400-450V. It can automatically compensate the large load according to the set voltage range value to enhance the load capacity of the drone. It can reach the parameter of 100m with payload 10kg.
- Military class hard case for 3500W-G for long distance transport. (MCT-3500W version has no Hardcase, only wooden packing for intl transport)
System include:
Both Ground Power Supply System with Air Module and Cable
