NAJA HP-2930 H-TAIL Full Carbon Fiber 2024 Version VTOL Platform Petrol Engine Version with PNP option (Global Warehouse)

he NAJA HP 2930mm VTOL platform is a long endurance unmanned VTOL airframe designed for professional use by petrol engine as the pusher power house.

It is the aircraft with the vertical take-off and landing (VTOL) function that can hover, take off, and land vertically. The platform caters to larger UAS projects such as universities or commercial projects. This aircraft is capable of carrying a wide variety of payload configurations and offers extended flight times.

The NAJA 2930mm is an exceptionally large aircraft designed for professional use and can be equipped with a full system of advanced control electronics to run in sync with the most advanced ground stations. This plane can get most anywhere, and perform most any job-related task you may require. The prototype was tested by DLE40cc with less endurance. If the budget is ok, recommend 60cc-70cc EFI or Heavy Fuel engine (DLE60cc EFI, DLA64 EFI, QRS68cc EFI, LID70cc EFI) Which will boost the efficiency by fuel consumption around 0.55-0.65Liter/Hour.

Airframe Cost $6799 USD

e-Power System Package (ePSP) for PNP recommended (Extra charge $6599 USD)

• CUAV V5+ Autopilot x 1
• CUAV Neo 3 GPS x 1
• T-motor MS8014 180kv Motors x 4
• T-motor Flame 100A HV ESC x 4
• DLE 60cc Engine x 1 (can be upgraded to EFI 60cc-70cc EFI)
• Falcon PAE 24″ Propeller x 2 pairs
• Premier 19″ Wooden Propeller x 1
• Savox SC-1251MG or KST/GDW Servo x 4
• Savox SC-1256TG or KST/GDW Servo x 2
• Savox SC-1250MG or KST/GDS Servo x 1
• Airspeed sensor system with pitot (Rain-proof and de-icing) DroneCAN Protocol x 1
• CUAV Airspeed Sensor x 1
• UBEC x 1
• UAV Navigation Lights x 1 set
• Build Kit x 1 

Optional Datalink from 15-200km

Optional Professional/Military Ground Control Station (for PNP version, Teamaustars will help to integrate all together and test, which is included in Build service and Tuning & Flight test)

Optional Industrial camera or POD, check Camera & PODs categories.

To help the end user team to save the time and costs, Team Austars provide "Build service" and "Tuning & Flight Test" with optional propulsion flight system (including well known flight controller , RTK positioning)

• Comparing with STD versions, there're some updates for new carbon fiber version:
• The booms have been changed to lock design. Each boom is divided into two pieces for easier carry and international shipping.Booms and internal ribs all have been strengthened for longer time use.Built-in VTOL motor mounts with 5 degree offset angle.

SPECIFICATIONS for the airframe