ROTO 35 FS - single cylinder gasoline RC airplane engine GST Inc (AUS Warehouse)

ROTO motor 35 FS is single cylinder  4 stroke  gasoline engine made specifically for the model  airplanes up to 3.5 m (11.5’) and 12 kg (26.5 lb). These dates are for recreational flying.

The Engine was developed in Europe with the assistance of CAD systems (Solidworks) and optimized for the liquid flow in the Flow software (made by Solidworks).

All ROTO engines and its components are made and programed by utilizing the state of art 5 axis machinery made by American companies HASS and Siemens NX.

Every engine, made by ROTO MOTOR Company is bench tested and adjusted by qualified technician on the Engine Star equipment to ensure its peak performance.

Basic technical data:

* DISPLACEMENT 35 ccm

* STATIC ENGINE THRUST 8,5 kg

* BORE 39,5 mm

* WEIGHT1 790 g

* PISTON ROD2 × NEEDLE BEARING TORRINGTON

* CRANK SHAFT2x BALL BEARING NSK

* INGNITIONPROCESSOR CONTROLLED

* FUELGAS + OIL MOTUL 600 1:40  * RPMrpm 1200 - 6000 with propeller 20/10"

RotoMotor Team give one year factory defects warranty. After factory warranty time, Customers can send the engine back to Sydney Australia for repair/maintenance. Team Austars only charge factory parts cost and labor fee $50 AUD/Hour (GST Inc).Both inbound/outbound freight costs will be paid by the buyer.

Austars Engine Team in Sydney Australia give 24/7 days technical online support.

Our online 24/7 contacts:

WhatApp/line: 0061 0433 000 015

Wechat: 2672191400

Livechat or Skype: Austarsmodel   

Facebook Messenger: Austars-Model Sydney   

Manufacturing technology ROTO 35 FS

• Crank case (kit) – it is rough-worked of the cast at the CNC milling cutter. After that it is covered or slashed with a special colour. 
  
  
• Cylinder (roll) – it is made of one piece of dural with pressed insole from the mild-granular cast iron, it is sharpened and honed to the correct size.  
  
  
• Piston – it is casted from silicon alloy with one sealing circle. The aparature for the bung 8 mm is honed.  
  
  
• Piston rod – it is forging, which is completely worked. Two needle focuses are moulded into piston rod, it is made for the piston and cranked bung.  
  
  
• Crank shaft – it is made of one piece of steel, it is cemented and hardened and it is completely sharpened. 
  
  
• Back lid of the engine – it is worked casting, in which is hardened and sharpened rolled slide - valve layed. 
  
  

Pieces of engine are after clearing by the scan pieced together in preparations at the special workplace.

Description of the engine:

4-Stroke Gasoline Engine

RC Gasoline Engine

Engine for RC Airplane  

Gasoline RC Engine

Single Cylinder Gasoline RC Engine

Four Stroke Gasoline Engine

RC Airplane engine

Engine for UAV